This is a general use three phase brake motor, with an AC brake, available in a cast iron frame. The power options range from 4kW to 30kW.

Product Description

FLS FAP Series

General Use (U.G.) Brake Motors

Enclosed, three-phase asynchronous brake motors, with failsafe alternating current (AC) brake, according to IEC 60034, 60072, EN50281.
Separate supply to the motor and the brake.

Single Speed
    • Power: 4kW to 30kW
    • Frames: 160 to 200L
    • Speed: 4, 6 and 8 poles, 230/400V or 400V Δ, 50Hz.


    • Maximum number of Starts/Hr:

 For acontinuous duty: 6

Two Speed (on request)
  • Power: 4kW to 30kW
  • Frames: 160 to 200L
  • Speed: 4/8, 4/12 and 4/16 poles. For other speeds, please consult us.

 IP55 protection for the motor
 IP44 protection for the brake.



 Brake release indicator
 Brake lining wear indicator
 Adaptation for a tachometric dynamo or an alternator
 Special position of the brake terminal box
 IP44 to IP65 protection.


 PTO, PTF, PTC thermal protection
 Anti-condensation heaters
 Roller bearings (except for LS 160 MP)
 Forced ventilation – study
 IP65 protection for frame sizes 160 and 180.

Finish: Cast Iron housing

Routine test, no load test, dielectric test, control of the resistance and direction of rotation.
Honing and traceability of the brake disk.

Brake Motor Mains Supply

 Standard according to IEC 60038:

 230/400V +10% -10% at 50Hz.

 Standard construction suitable for:

 220/380V +5 % –5 % at 50Hz
 240/415V +5% –5% at 50Hz.