FLSPX FCR Series
Category 2 â€“ Zone 21: Explosive Dust
General use (U.G.), enclosed, three-phase asynchronous brake motors, according to IEC 34, 72, EN 50281.
- Power: 0.55kW to 9kW
- Frames: 80mm to 132mm
- Speed: 4 poles, 230/400V or 400V Î”, 50Hz.
Two Speed (on request)
- Power: 0.12kW to 9kW
- Frames: 71mm to 160mm
- Speed: 2/4 and 4/8 poles, for general use; 400V or 400V Î”.
IP65 standard version.
Motors for Variable Speed Operation
Fitted with thermal probes in winding (obligatory).
On consultation (to be selected).
Forced ventilation not allowed.
Finish: Cast Iron casing
Assembled with protected screws.
Protection of the flange and shaft end against atmospheric corrosion.
Individual anti-shock packaging.
Brake Motor Mains Supply
â€¢Â Standard construction according to IEC 38:
–Â 230/400V +10% -10% at 50Hz
–Â 400V Î” +10% â€“10% at 50Hz.
â€¢Â The brake mains supply is integral and the brake motor connects as a standard motor. If it is separate: the alternating (AC) supply is exterior to the motor.
â€¢Â Selection of brake inertia (HA 80 to 100); manual brake release
â€¢Â Drip cover; 2nd shaft end; thermal probes
â€¢Â Reduced response time; connector
â€¢Â Encoders and/or forced ventilation.