3200i, 3600XRi

These are Single and 4 Quadrant DC motor controllers from 4A to 48A, built with multiple I/O system features. The power options range from 0.55kW to 11kW.

Product Description

3200i, 3600XRi

DC Motor Controllers from 4 Amps To 48 Amps
  • Model 3200i – 1.1kW to 11kW
  • Model 3600XRi – 0.55kW to 9.5kW

Model 3200i

Available in four current outputs up to 48 Amps, to closely match your motor requirements. To make installation easier, you can quickly connect using screw terminals.

Easy to access control terminals, extensive features and I/O make this range of DC motor controllers an industry standard.

With line-to-line or line-to-neutral operation up to 48 Amps, you can use this controller in a wide range of motor control applications. You can also integrate this motor controller with other drives and electrical equipment. The 3200i is a fully isolated DC motor controller.

Overview of Models:
    • Four models

• 8 Amps (2.2kW/3HP)
• 16 Amps (4kW/6.5HP)
• 32 Amps (7.5kW/10HP)
• 48 Amps (11kW/15HP)

  • Fully isolated control electronics
  • 150 x 200 x 110 (mm) H x W x D
  • Numerous inputs and outputs for complex system applications
  • Torque control input for basic winding or tension control, with overspeed limiting
  • Switch selectable Tach or Armature voltage feedback
  • Volt free change over contacts for zero speed and/or stall
  • PLC compatible input and output signals
  • Extra 50% peak torque for 30secs prior to stall trip operation
  • On board relay indicates zero speed and/or motor overload

Model 3600XRi

This 4 Quadrant regenerative DC motor controller gives a fast controlled response over the full forward/reverse speed range for motoring and braking.

Improve your energy efficiency by regenerating energy into the mains supply whilst under braking. The energy invested accelerating the load mass is recovered when braking. No dissipation of energy in wasteful braking resistors.

With five models up to 36 Amps, you can closely match the power required by your application.

The 3600XRi has a robust design and is packed with features to help you reduce your down-time and maintenance costs.
Overview of Models:

    • 4 Quadrant, fully regenerative DC drive
    • Five power ratings:

• 4 Amps (0.55KW/0.75HP)
• 8 Amps (1.1W/1.5HP)
• 16 Amps (4kW/5.3HP)
• 32 Amps (7.5kW/10HP)
• 36 Amps (9.5kW/12.6HP)

  • Isolated control electronics for easy connection to other drives/equipment
  • Suitable for permanent magnet or shunt wound motors
  • 175 x 200 x 70(mm) H x W x D
  • Dual setpoint facility for alternate speed eg. run and crawl
  • Direct pushbutton inputs for control of stop/start, direction and jog functions
  • 4Q torque input
  • Regen to zero input
  • 2Q torque input
  • Push-button forward/reverse
  • Multiple I/O
  • Push-button start function