FLS FAP

This is a general use three phase brake motor, with an AC brake, available in a cast iron frame. The power options range from 4kW to 30kW.

Product Description

FLS FAP Series

General Use (U.G.) Brake Motors

Enclosed, three-phase asynchronous brake motors, with failsafe alternating current (AC) brake, according to IEC 60034, 60072, EN50281.
Separate supply to the motor and the brake.

Single Speed
    • Power: 4kW to 30kW
    • Frames: 160 to 200L
    • Speed: 4, 6 and 8 poles, 230/400V or 400V Δ, 50Hz.

 

    • Maximum number of Starts/Hr:

 For acontinuous duty: 6

Two Speed (on request)
  • Power: 4kW to 30kW
  • Frames: 160 to 200L
  • Speed: 4/8, 4/12 and 4/16 poles. For other speeds, please consult us.
Protection

• IP55 protection for the motor
• IP44 protection for the brake.

Options

• Brakes

 Brake release indicator
 Brake lining wear indicator
 Adaptation for a tachometric dynamo or an alternator
 Special position of the brake terminal box
 IP44 to IP65 protection.

• Motor

 PTO, PTF, PTC thermal protection
 Anti-condensation heaters
 Roller bearings (except for LS 160 MP)
 Forced ventilation – study
 IP65 protection for frame sizes 160 and 180.

Finish: Cast Iron housing

Routine test, no load test, dielectric test, control of the resistance and direction of rotation.
Honing and traceability of the brake disk.

Brake Motor Mains Supply

• Standard according to IEC 60038:

 230/400V +10% -10% at 50Hz.

• Standard construction suitable for:

 220/380V +5 % –5 % at 50Hz
 240/415V +5% –5% at 50Hz.