This is a general use three phase brake motor, with a range of additional options, available in a cast iron frame. The power options range from 0.55kW to 9kW.

Product Description

FLS FCR Series

General Use (U.G.) Brake Motors

Enclosed, three-phase asynchronous brake motors, according to IEC 34, 38, 72.

Single Speed
    • Power: 0.55kW to 9kW
    • Frames: 80mm to 132mm
    • Speed: 4 poles, 230/400V or 400V Δ, 50Hz.


  • For a non direct on line starting, please consult us.

IP55 standard protection.

Motors operating on Variable Speed

Fitted with thermal probes in winding (obligatory).

Finish: Cast Iron housing

Assembled with protected screws.
Protection of the flange and shaft end against atmospheric corrosion.
Individual anti-shock packaging.

Brake Motor Mains Supply

• Standard construction according to IEC 38:

 230/400V +10% -10% at 50Hz
 400V Δ +10% –10% at 50Hz.

• The brake mains supply is integral and the brake motor connects as a standard motor. If it is separate: the alternating (AC) supply is exterior to the motor.


• Selection of brake inertia (HA 80 to 100)
• Manual brake release
• Drip cover; 2nd shaft end; thermal probes
• Reduced response time; connector
• Encoders and/or forced ventilation.